Basic level processing in metope, the building is decorated can change ordinary putty to waterproof putty, the bonding between coating and base more strong, not easy to fall off, also can avoid metope yellow caused by moisture. In addition, when scraping putty, pay attention to the number of times and drying time. It generally takes 1-3 times, during which the normal dry penetration time is 1-2 days. But when scraping putty in cloudy and rainy days, apply dry cloth to wipe the moisture off the wall to keep the wall as dry as possible.

    Although it is the main function of putty leveling, but only batch blow be bored with child, is only half of the leveling work has been done, the other half, half of the final results are decided, to solve by grinding. This also is the main function that makes metope burnish. Will inevitably be putty batch process, some tiny flaws, such as putty border summer-planting, local group of scraping tracks too thick or thin, metope suction caused by the pinhole, and so on, these defects can be addressed by metope burnish.

    Whole of be bored with child after polishing surface structure more uniform, can strengthen the performance effect of emulsioni paint, and avoided because of difference of surface structure may cause some problems, such as local color glaze, etc.).

    The interval that brush putty is in metope base course processing also is the problem that owner people take seriously very much. How to check whether putty has been fully dry, next east art treasure imitated stone lacquer brand small make up to take everybody to know.

   [palm perception] generally, the second time can only be brushed after the base putty is completely dry. Check whether base course putty is dry have a simple and feasible method, you need to touch metope with palm only, if putty is already dry, the rubbing of palm and metope can send out "sand" sound; You can also check your hands. If you get a lot of dust on them and feel wet, you can tell they are not dry.

    [visual judgment] This is a kind of judgement method basically, the color after putty is dry can whiten a bit, if some place still present the color that fluster or hair ash, prove metope brush the first time putty is not dry thoroughly. If the wall is completely dry, its color is the same.

    [use sandpaper] if putty dry thoroughly, with sandpaper gently grinding will appear dust; If sandpaper is polished; No dust or dust very little, that proves metope putty has not dried thoroughly, must not undertake second time putty construction.